SynDeck® Grout Sealer (SS1255) is a two component, high thixotropic index epoxy specifically
designed to seal decks, floors and other surfaces where higher porosities may be of concern.

SynDeck® Epoxy Adhesive (SS5501) is a two component, 100% solids, amine-cured epoxy flooring
adhesive that has excellent adhesion. It is specifically designed to be installed on primed or underlayed
surfaces. It works well with Amtico’s Stratica, other vinyl tiles and VCT tiles.

SynDeck® Bond Coat (SS1222) is a low viscosity, water-clear, 100% solids epoxy specifically designed
as a primer material to be used in conjunction with installation of underlay material.

SynDeck® Grout Sealer Slow (SS1256) is two component, high thixotropic index epoxy specifically
designed to seal decks, floors and other surfaces where higher porosities may be of concern. SS1256
can be used to seal porous surfaces prior to a color coat or seal coat.

SynDeck™ IMO UVR is a high performance, abrasion resistant, UV resistant epoxy coating that has
0-VOC. It has excellent adhesion, is user friendly, and cures to a resilient high-gloss film. SynDeck™
IMO UVR has very low odor, superior clarity and is self-leveling. SynDeck™ IMO UVR can be applied
at lower temperatures (50oF/10oC) with no blushing and is dry for foot traffic overnight.

 SynDeck® Epoxy Top Coat/Color Coat SS5000 Series is a top quality, abrasion resistant amine-cured epoxy coating that offers 0-VOC, has excellent adhesion, is user-friendly, and cures to a resilient high-gloss film. SS5000 Series can be applied over deck underlayments and properly prepared existing epoxy coatings, resulting in a new high-gloss finish in one coat. SS5000 Series has very low odor, superior clarity and is self-leveling. SS5000 Series can be applied at lower temperatures with no blushing and is dry for foot traffic overnight.

SynDeck® Flex IMO is a 100% solids two-component waterproofing underlayment that meets IMO
Annex 1 parts 2, 5 & 6. It has excellent chemical and moisture resistance. SynDeck® Flex IMO
is a resilient decking material and water barrier which is formulated to be applied directly to metal
and other properly prepared substrates. It is a troweled product, which has good flow and leveling
properties and is 0-VOC.

SynDeck® Epoxy Combo Grout (SS1241) is two component epoxy combined with carefully selected
sand to produce a quality tile setting/grout material. Outstanding features include:
• Meets ANSI Spec A 118.3-1985
• Convenient ¾ gallon packaging
• Easy “water” clean up
• Outstanding thermal cycling capacity
• Excellent chemical resistance
• No unpleasant odors when components are mixed
• Epoxy is USDA approved

SynDeck™ Slip Resistant Additive is a polymeric, light-weight material that is designed to impart various levels of roughness to an epoxy finished floor. Unlike traditional media like glass bead and aluminum oxide, this material stays in suspension in SynDeck™ coatings so less is required and the final appearance is much more even. SynDeck™ Slip Resistant Additive is available in a standard 50 mesh and a slightly more aggressive 20 mesh size.

SynDeck® Ultra Lightweight Terrazzo (SS1290FC Terrazzo) is three component aggregate filled, 100%
solids amine-cured epoxy flooring product that is 0-VOC. This product has excellent adhesion and is
specifically designed to meet Navy requirements of <1 lb/ft2 at ¼ inch thickness. This product is an
underlayment to fair and level decks and to provide a decorative surface at the same time. SS1290FC
Terrazzo can resemble a marble/granite surface when cured.

SynDeck® IMO Epoxy Top Coat/Color Coat SS5100 Series is a top quality, abrasion resistant aminecured
epoxy coating that offers 0-VOC, has excellent adhesion, is user-friendly, and cures to a resilient
high-gloss film. SS5100 Series can be applied over deck underlayments and properly prepared existing
epoxy coatings, resulting in a new high-gloss finish in one coat. SS5100 Series has very low odor,
superior clarity and is self-leveling. SS5100 Series can be applied at lower temperatures with no
blushing and is dry for foot traffic overnight.

SynDeck® Waterproof Membrane (SS2102) is a 100% solids, two component waterproofing product
that has excellent chemical and moisture resistance. SS2102 is typically specified as a resilient water
barrier applied to steel, composites, and sealed wood surfaces. SS2102 is a user-friendly product
which has good leveling properties and is 0-VOC.

SynDeck® Regular Underlayment Systems (FR0499) are a three component, aggregate-filled, 100%
solids, amine-cured epoxy flooring product that offer 0-VOC, have excellent adhesion, and are specifically
designed to meet Navy standards. This class of products has over 25 years of successful field
usage and is applied as an underlayment to irregular or uneven deck surfaces.

SynDeck® Ultra Lightweight Underlayment (SS1290FC) is a three component, aggregate-filled, 100%
solids amine-cured epoxy flooring product that is 0-VOC, has excellent adhesion, and is specifically
designed to be less than 1 lbs/ft2 at ¼ inch installed. This product can be applied as an ultra lightweight
underlayment for all other approved deck systems. It may also be applied over all approved
prime coats and without primer over properly prepared surfaces.

SynDeck™ 1.5 Underlayment Series is a three component, aggregate filled, 100% solids amine-cured
epoxy flooring product that is 0-VOC. It has excellent adhesion, and is specifically designed to be
1.5lbs./ft² (7.32kg/m²) at 1/4 inch (6mm) installed. This product can be applied as an underlayment for
all approved deck systems. It may also be applied over all approved prime coats.

SynDeck™ Thicken It is a synthetic thickener that is an improved alternative to fumed silica.  Thicken It is an excellent compliment to epoxy and urethane systems when extra body is needed, such as coping applications. Thicken It is UV and mildew resistant and withstands exposure to oxidizing agents. These properties, coupled with its higher specific gravity than fumed silica, makes Thicken It extremely efficient and the most desired thickening agent for SynDeck™ coatings.